ENDER 3 BED

  • $54.00
    Unit price per 

The Ender 3 bed is machined out of 6.35mm thick 5083 (K100S) Aluminum Cast Tooling plate. We make these beds to order, so please leave 3-5 business days to get them shipped once your order is placed.

We check each bed on a granite surface plate to make sure it is within specs for use on your printer.

We also have the option to embed magnets it in if you like.

In addition, we have had a few requests for a 3 point mount.  What this means is that we eliminate 2 of the holes, and put 1 hole centered between where the 2 holes were.  We also allow you to have both 3 and 4 point mounting points in case you decide to upgrade at a later date.

All beds have been checked to be under 0.2mm overall flatness.

We recommend Subtle Design or Buildtak Flex Plates.

IMPORTANT NOTE: If at any point you decide to remove the magnets, first of all, when reinstalling the screws, turn the screw backwards until you feel the threads in the screw jump the threads in the bed. Once you feel that little bump, turn the screw in until it gets to the "screw stops turning point" with zero strength behind it. Once the screw has stopped turning, tighten it 1/32nd of a turn and NO MORE. Overtightening WILL shatter the magnets.

  • Weight: 3 lbs (approx)
  • Length: 239mm
  • Height: 239mm
  • Thickness: 6.35mm
Shipping calculated at checkout.

pack2_carrier Created with Sketch.  
Delivery policy
We ship within one business day. Message us if your country is not available, and we will add it.


We Also Recommend