RatRig V-Core 3 200 Bed
The RatRig VCore 3 -200 Bed from Mandala Rose works is now available.
Our beds are made from 5083 Cast Tooling Plate and are 6mm thick.
We are offering these beds in standard or magbed configurations. Our 200 beds contain 9 N48SH magnets which are rated for 150C!
Our beds are guaranteed to be no more than 0.1mm out of flat and most come in less than 0.1mm out of flat.
These beds are machined once an order is placed, so please allow 5-10 business days for us to ship. We are typically much faster, but in some cases the machine we make these on may be occupied by other orders.
IMPORTANT NOTE: If at any point you decide to remove the magnets, first of all, when reinstalling the screws, turn the screw backwards until you feel the threads in the screw jump the threads in the bed. Once you feel that little bump, turn the screw in until it gets to the "screw stops turning point" with zero strength behind it. Once the screw has stopped turning, tighten it 1/32nd of a turn and NO MORE. Overtightening WILL shatter the magnets.
We ship within one business day. Message us if your country is not available, and we will add it.